TINKERKIT 2/3 AXIS ACCELEROMET
TINKERKIT 2/3 AXIS ACCELEROMET

TINKERKIT 2/3 AXIS ACCELEROMET

16,82 €
Impuestos incluidos

Compra Segura

Todos los datos de compra son encriptados y protegidos

Política de entrega

Envío en 48/72 horas

Política de devolución

14 días de devolución

TinkerKit 2/3 Axis Accelerometer Module for use with Arduino Boards
The T000020 TinkerKit is based on the LIS344AL, a three axis accelerometer. You can get data about the third axis (referred to as Z) by soldering a header to the through hole labelled Z. On the back of the module you can find two signal amplifier and a green LED that signals that the module is correctly powered. This module outputs 0V to 5V on one of its two signal pins when its G force is changed (e.g. is moved). The value is approximately 2.5V when there is 0G on the X or Y axis. When you connect this module to the input on an Arduino using the TinkerKit shield, you can expect to read values between 0 to 1023 while moving the module. This module is a sensor. The connector is an output which must be connected to one of the input connectors on the TinkerKit shield.
  • ±3.5g full scale
  • Output voltage, offset and sensitivity are radiometric to the supply voltage
  • Factory trimmed device sensitivity and offset
  • Embedded self test
  • High shock survivability (10000g)
  • Sensing & Instrumentation
  • Hobby & Hardware Hacking
  • Consumer Electronics
  • Robotics
 
T000020
999 Artículos

También podría interesarte

Los clientes también compraron

Los más vendidos

Categorías

Novedades

Nuestros servicios

Pagos 100% seguros

Todos tus datos serán encriptados y totalmente seguros.

Entrega rápida

Enviamos cada día nuestros pedidos para que los recibas cuanto antes.

Atención al cliente

En Diotronic garantizamos la mejor atención con nuestros clientes.

Product added to wishlist
Producto añadido para comparar.

iqitcookielaw - module, put here your own cookie law text